KAMIKAZE PRO AIO V4 30A - BETAFLIGHT 3.2
** V5 warning, it does not exist, the latest version is V4**
Some retailers are claiming a V5 Azgaurd, as you can see from the pictures of our products it is the latest version with softmounts, there is no newer version of this board. Be wary of scams, and other retailers claiming something without pictures to back up current product as V4 to a minimum.
The Kamikaze board is also not the azgaurd, but a variant of it done in house by the Kamikaze engineers improved on the original version.
DO YOU WANT MORE THAN AWESOME? OH YES WE DID!
We heard your requests, went back to the design table and made it better! Is that even possible, Oh Yeah it is! The Kamikaze AIO V4 30A is HERE!
The Kamikaze AIO is now back and looking brighter and better than ever! Sporting a new colour job and some integrated Pilot requests.
- Version 4
- 6 Layer 2oz copper pcb
- Softmount grommets included
- Better Current Protection
- 5v Regulator Upgrade
- 4 x 4pin wiring looms pre-made
- Capacitor included
- XT60 cable pre-made and included
- Custom Hex pre installed
- BetaFlight 3.2
- BlheliS 16.67 RC-Commands
Finally, no more massive flight control stacks! Using the latest Kamikaze ESC's combined into a simple board with the latest hardware you will get the cleanest of builds!
What does Blheli-S 16.67 do? Means no more external beeper! just set the beeper and your motors will beep to find your quad instead of you needing to add more external parts.
Available in the following flavours:
- Kamikaze AIO V4
- Kamikaze Stubby (Shorter board for those tighter fits like KORE, Zorro, and Lightning frames)
- Kamikaze AIO V4 (Double Trouble) 2pc FC Combo - You gotta share the love
Scared of breaking an esc or just need a replacement for no reason? We will replace it for 50% of the retail price, no questions asked. (Unless you really smashed the board, like broke the xt60 off)
F4, with Betaflight OSD, 150A PCB and 30-40A esc's all on a 6 layer board with 2oz copper. Mounting holes 30.5 x 30.5mm. Incl. OSD / SD Card / F4 FC / Current sensor / BEC
ESC's were tested with 3-4S, 2308 Motors 2300KV with 5045x3 props
- SPI Gyro MPU6000
- 8k/8k Loop Timing
- On-Board Betaflight OSD
- MicroSD Blackbox
- F4 Processor (F405)
- 5v1a SBEC (Upgraded)
- Built-in Current Sensor
- 4x BLHELI_S ESC(DSHOT Ready J_H_15 firmware)
- 3 x UART
- Buzzer output (Through motors using 16.67 RC commands)
- WS2812B LED output
- Betaflight 3.2 with custom HEX
- BLHeliS 16.67 RC Commands
Please Follow this wiring diagram: Kamikaze PRO AIO V4 30A
YOU ASKED & WE DID! NOW FLY!